Search results for "suspended solids"
showing 10 items of 51 documents
Correlation of wood-based components and dewatering properties of waste activated sludge from pulp and paper industry.
2010
Large amounts of wet sludge are produced annually in municipal and industrial wastewater treatment. Already in pulp and paper industry, more than ten million tons of primary sludge, waste activated sludge, and de-inking sludge is generated. Waste activated sludge contains large quantities of bound water, which is difficult to dewater. Low water content would be a matter of high calorific value in incineration but it also has effects on the volume and the quality of the matter to be handled in sludge disposal. In this research waste activated sludges from different pulp and paper mills were chemically characterised and dewatered. Correlations of chemical composition and dewatering properties…
Hybrid activated sludge/biofilm process for the treatment of municipal wastewater in a cold climate region: a case study.
2011
A hybrid activated sludge/biofilm process was investigated for wastewater treatment in a cold climate region. This process, which contains both suspended biomass and biofilm, usually referred as IFAS process, is created by introducing plastic elements as biofilm carrier media into a conventional activated sludge reactor. In the present study, a hybrid process, composed of an activated sludge and a moving bed biofilm reactor was used. The aim of this paper has been to investigate the performances of a hybrid process, and in particular to gain insight the nitrification process, when operated at relatively low MLSS SRT and low temperatures. The results of a pilot-scale study carried out at the…
A mathematical approach to predict the solids concentration in anaerobic membrane bioreactos (AnMBR): Evaluation of the volatile solids solubilization
2020
[EN] Anaerobic Membrane Bioreactors (AnMBR) are gaining attention as a suitable approach for sustainable low-strength wastewater treatment, as they bring together the advantages of both anaerobic treatments and membrane bioreactors. However, increasing the sludge retention time (SRT) necessary to favor hydrolysis increases the suspended solids concentration potentially leading to decreased permeate flux. Therefore, the availability of a mathematical approach to predict the solids concentration within an AnMBR can be very useful. In this work, a mathematical model describing the volatile solids concentration within the reactor as a function of the operating parameters and the influent charac…
Influence of Wind on Suspended Matter in the Water of the Albufera of Valencia (Spain)
2021
Wind is one of the factors that has a great influence on suspended matter in lakes, especially in shallow lagoons. In order to know how wind affects the water in Albufera of Valencia, a shallow coastal lagoon, the measured variables of turbidity and transparency have been correlated with the estimates by processing Sentinel-2 satellite images with the Sen2Cor processor. Data from four years of study show that most of them are light to gentle easterly breezes and moderate to fresh westerly breezes. The results obtained show significant correlations between the measured variables and those obtained from the satellite images for total suspended matter and water transparency and with the averag…
Characterization of activated sludge settling properties with a sludge collapse-acceleration stage
2019
Abstract The sedimentability of the activated sludge can be affected by the presence of a large variety of coagulants and polymers from a previous physical-chemical process. In this paper, the activated sludge settling process in industrial wastewater treatment plants where the sludge does not settle in a conventional way is studied. The two observed constant hindered settling velocity stages and the instant the intermediate sludge acceleration period occurs are described. A variation of the Richardson and Zaki model is used to characterize the two stages of constant settling velocity. The concentration of suspended solids, where a sudden decrease of hindered settling velocity was observed,…
Effect of biomass features on oxygen transfer in conventional activated sludge and membrane bioreactor systems
2019
Abstract The aim of the present study was to compare the oxygen transfer efficiency in a conventional activated sludge and a membrane bioreactor system. The oxygen transfer was evaluated by means of the oxygen transfer coefficient and α-factor calculation, under different total suspended solids concentration, extracellular polymeric substances, sludge apparent viscosity and size of the flocs. The oxygen transfer coefficient and α-factor showed an exponential decreasing trend with total suspended solid, with a stronger oxygen transfer coefficient dependence in the conventional activated sludge compared to the membrane bioreactor. It was noted that the oxygen transfer coefficient in the conve…
Monitoring marine water quality of Sicily by means of remotely sensed imagery
2008
Within the framework of the GEOGRID research project, a semi-automatic computational chain has been implemented in order to map the time evolution of marine water quality, around Sicily island, by means of satellite images. To this aim a set of MODIS (TERRA and AQUA) multispectral images has been acquired. An automatic system to georeference and calibrate the images has been implemented. All the procedures to map clorophill-a, total suspended solids and turbidity come from the literature, whereas models parameters have been calibrated by means of in situ measurements.
Influence of volatile solids and pH for the production of volatile fatty acids: batch fermentation tests using sewage sludge
2021
The aim of this work was to study the effect of volatile suspended solid (VSS) and pH on volatile fatty acids (VFA) production from waste activated sludge (WAS) fermentation by means of batch tests. The final goal was to gain insights to enhance VFA stream quality, with the novelty of using WAS with high sludge retention time. Results revealed that the optimum conditions to maximize VFAs and minimize nutrients and non-VFA sCOD are a VSS concentration of 5.9 g/L and initial pH adjustment to pH 10. The WAS bacterial community structures were analysed according to Next Generation Sequencing (NGS) of 16S rDNA amplicons. The results revealed changes of bacterial phyla abundance in comparison wit…
The effect of the solids and hydraulic retention time on moving bed membrane bioreactor performance
2018
Abstract The aim of the present paper was to investigate the effect of solids (SRT) and hydraulic (HRT) retention time on Integrated Fixed Film Activated Sludge (IFAS) University of Cape Town (UCT) membrane Bioreactor (MBR). In particular, three different pairs of SRT and HRT values were analysed, namely, Phase I 56 d/30 h, Phase II 31 d/15 h and Phase III 7 d/13 h. The short-term effect of these three SRT/HRT conditions was assessed by analysing several system performance indicators: organic carbon and biological nutrient (nitrogen and phosphorus) removal, biomass respiratory activity, activated sludge filtration properties and membrane fouling. The results showed that the decrease of SRT/…
Comparison of laboratory-scale thermophilic biofilm and activated sludge processes integrated with a mesophilic activated sludge process
2003
A combined thermophilic-mesophilic wastewater treatment was studied using a laboratory-scale thermophilic activated sludge process (ASP) followed by mesophilic ASP or a thermophilic suspended carrier biofilm process (SCBP) followed by mesophilic ASP, both systems treating diluted molasses (dilution factor 1:500 corresponding GF/A-filtered COD (COD(filt)) of 1900+/-190 mgl(-1)). With hydraulic retention times (HRTs) of 12-18 h the thermophilic ASP and thermophilic SCBP removed 60+/-13% and 62+/-7% of COD(filt), respectively, with HRT of 8 h the removals were 48+/-1% and 69+/-4%. The sludge volume index (SVI) was notably lower in the thermophilic SCBP (measured from suspended sludge) than in …